EPC25 transformer mainly supplies power to each functional module of the doorbell to realize image and sound transmission, data storage, sending control commands and other functions. It can output three sets of voltages at the same time, including power supply and protection. In addition, primary and secondary isolation protection is realized to prevent danger of leakage caused by circuit failures.
| Voltage & Current Load | ||||
| Input（Type） | 110-220V | |||
| Output（Type） | V1 | V2 | V3 | |
| 12V | 12V | 10V | ||
| Electrical Characteristics | ||||
| NO. | ITEMS | TEST PIN | SPECIFICATION | TEST CONDITIONS |
| 1 | Inductance | 8-9 | 1.3mH±10% | 100KHz 1Vrms |
| 2 | Leakage | 8-9 | 26uH Max | 100KHz 1Vrms Pin 2,3,4,5,6,7,10,11 short |
| 3 | DCR | 2-3 | 90mΩ Max | At 25℃ |
| 4-5 | 80mΩ Max | |||
| 6-7 | 290mΩ Max | |||
| 8-9 | 2.5mΩ Max | |||
| 10-11 | 82mΩ Max | |||
| 4 | HI-POT | P-S | No short break | AC1.8KV/1mA/2s |
| P,s-Core | AC1.2KV/1mA/2s | |||
| 5 | Insulation resistance | P-S | No short break | AC1.5KV/1mA/60s |
| P,s-Core | AC1.0KV/1mA/60s | |||
1. SMD chip structure
2. Adopt internal shield winding to improve the anti-electromagnetic interference ability
3. Magnetic core with additional protective tape extends safety distance
4. There are strict size requirements for smoothness of the SMD pins
5. Blister packaging
1. EPC25 SMD structure makes it possible to be installed by mounting technology which has high efficiency
2. Sufficient protecion of insulation and isolation for use safety
3. Designed with shielded winding, good EMC anti-interference ability
4. It can provide multiple stable output voltages at the same time, and the voltage fluctuation is small